Відео

Thanks, @johnfurey6569, I completely agree! A dump truck would be a great addition to the farm, and it would definitely help reduce the wear on the skid steer’s undercarriage. Unfortunately, we need something with tracks to handle the terrain and get to the dirt-moving sites on the property, so a tracked dump unit would be ideal. Hopefully, we can find the right solution to make things more efficient and protect our equipment! Appreciate the advice!

Thanks for the question, @josephsermarini5330! I’m in zone 5a, so the sun intensity is a bit lower here compared to your zone 8B. There are a lot of factors that can affect the leaves, especially with plants in full sun. Here’s a list of some things to consider: Sun intensity - Higher zones can have stronger sunlight, leading to sunburn on leaves. Watering practices - Inconsistent or inadequate watering can stress plants and lead to leaf damage. Soil quality - Poor soil conditions can weaken plants, making them more vulnerable to sun damage. Wind exposure - Strong winds can cause leaf scorch and stress the plant. Humidity - Low humidity can lead to faster evaporation and dry out the leaves. Mulching - Lack of mulch can leave the soil dry and affect how plants handle heat. Nutrient deficiencies - Plants lacking in essential nutrients might not handle sun exposure well. Pruning timing - Over-pruning in hot weather can expose leaves to more direct sun. Plant variety - Some varieties are more sun-tolerant than others.

@@GrowingABetterTomorrow Thanks. Seems like 90% of plant types are described as full sun, but few really are here in North Carolina. We not even that far south. They really need to come up with a better way of describing the ideal conditions.

@terrycartwright3653, that’s a great question! It really depends on local regulations and environmental laws. In many areas, moving the flow of water, especially natural springs or streams, requires permits to ensure it doesn’t negatively impact neighboring properties or ecosystems. It's always best to check with local authorities or water management agencies before making any changes to water flow on your property. Better to be safe and avoid potential issues!

@votuzh22, I use a combination of endomycorrhizae and ectomycorrhizae, depending on the plants. For vegetables, fruits, and herbs, I go with endomycorrhizae to boost nutrient uptake, especially phosphorus. For trees, like fruit and nut trees, I prefer a mix that includes ectomycorrhizae to support root health and overall resilience. It’s all about matching the right mycorrhizae to the plant’s needs! Thanks for the question!

Yes, I still have the Dixie Chopper, but I haven’t used it for a couple of years now. I switched over to a Kubota ZD1211, but I agree-the DC is a great machine! It served me well for a long time. Finding shops that still work on it is becoming a challenge, though. Sounds like your 22-year run has been impressive!

I totally agree with you! It would be so much easier if the lint filter opening was larger. We’re hoping the next generation of these units will come with a much better filter system. That would make maintenance a lot more convenient!

@@GrowingABetterTomorrow I got a cleaning brush today, looks like it collected most of the nasty stuff from inside.

That’s an amazing story! Hubbard squash can really surprise you with how vigorously they grow. They’re definitely tough to open, but totally worth it-we love them too! It’s like getting an unexpected bonus harvest, and they make for some delicious meals.

Thank you! We’ve really put a lot of work into creating that wild habitat, and it’s been rewarding to see the colors and life it attracts, especially with the dragonflies and those red flowers. It sounds like you’re dealing with a lot on your end. Navigating FEMA’s audit program and the NFIP compliance sounds intense, especially with all the local challenges you’re facing. Hopefully, getting the county audited can help push for the changes needed. The SIP rules and the FEMA connection with hurricane debris are definitely key issues. Wishing you the best in getting everything sorted out!

Thanks for watching the video and for the advice! I didn’t realize how much deeper the coil could be loaded. I’d definitely like to follow your flushing procedure-could you share a link to it? I also appreciate the tips on properly inserting the Drain Filter. Making sure it’s lined up correctly is something I’ll pay close attention to. Thanks again for the help!

Thea handles most of our harvesting, including the honeyberries. With everything we have going on, we only end up harvesting a small fraction of the berries each season. There’s always so much happening that it’s hard to get to all of them!

It sounds like you’ve got a good start with your Pikant #1 Shallots! We actually have an article on our website that covers growing shallots in detail-you can find it in the description. Plus, here’s a video that should help: ua-cam.com/video/VY7k4MPGovs/v-deo.html. Whether to plant in spring or fall can depend on your local climate, but both seasons can work depending on what you’re aiming for.

Thanks for the feedback, @jamesamos2454! It may look a bit dry in the video, but it's actually quite wet. We've had more rain this summer than we've seen in over a dozen years!

Thanks for the suggestion, @SlackerU! Given the slope and the runoff into our pond, we're cautious about altering the pH. We want to avoid impacting the pond's ecosystem, so we’re focusing on other methods to address the bare dirt.

Thanks for the tip, @SlackerU! We’ve found that our plastic reusable ties work much better for our needs than the wire options. They’ve been really durable and effective for us. Hope you find some good wood chips for your project!

@just4mewife, I totally understand-redoing projects seems to be a part of the process! I’m glad you think everything looks great. We’ve had quite a bit of rain lately, so I’d gladly send some your way if I could!

@user-zv9re6zk8v, thornless locusts with lots of pods are usually from the Robinia pseudoacacia species, particularly varieties like ‘Purple Robe’ or ‘Twisty Baby.’ For more detailed information, I’ve posted an article on this topic at Mindful Living Sanctuary mindfullivingsanctuary.com and an older video you might find helpful here: ua-cam.com/video/R_yNdI7MdXI/v-deo.html. Hope that helps

@tammyhoward8238, I’m so glad you found the information helpful! Your support means a lot to me and really motivates me to keep creating videos. Thanks for your kind words and encouragement! ❤

Thanks for your interest, @teresamason5155! 🌱 I do have some videos where I use Mycorrhizal fungi during transplanting various plants. You can find them on my channel. Additionally, I've written an article that goes into detail about the benefits of Mycorrhizal fungi. You can check it out on our website here: www.mindfullivingsanctuary.com/articles. I hope you find both the videos and the article helpful! ua-cam.com/video/vz0KE3ZmbUo/v-deo.html

Thanks for your comment! We have an article on our website that should answer all your questions. You can find the link in the description. We live in Oswego, New York, so the timing and tips we share should be helpful for you as well. Happy planting!

@wrenchmanhotrods1247 Haha, I totally get that! Having a place for everything is the dream. It’s all about getting organized so we can spend more time doing what we love instead of hunting for that one tool that always seems to disappear. Slowly but surely, we'll get there!

@michaelmarchione3408 Weeds do seem to have a mind of their own, don’t they? It’s like they know exactly where to pop up and make our lives difficult! Raised beds are a lifesaver, though-it’s amazing how much easier they make things. Wishing you and your wife good luck with those stubborn flower beds! Take care!

@mikehill1613 That’s a great question! Honestly, I’m not too sure about specific additives for improving particulate emissions on a diesel mower. It might be worth checking with a mechanic or the manufacturer for recommendations. If I come across any useful info, I’ll be sure to share it with you!

@SlackerU That's impressive! Grass clippings definitely bring the heat, and it's awesome that you're able to get your pile up to 164°F consistently. Having the orange-machine to flip the pile must make the process so much easier. I’ve noticed the same-those hot bacteria really get to work when the temps are just right. It’s all about finding that balance. Keep up the great work!

@js4455dl Nope, it didn’t bog down at all. This machine has plenty of power to handle even the tall stuff like grass and weeds without breaking a sweat. It cuts right through without any trouble!

@daisymayla Hi! I'm not familiar with that specific message either. It sounds a bit unusual, especially since you've used the same setting before without any issues. It might be worth checking the manual or reaching out to the manufacturer's customer service for more detailed info

@SlackerU I'm glad you enjoyed the ride! It’s definitely a lot of fun, especially when everything comes together. There's something really satisfying about working on the land and seeing the progress day by day. Thanks for joining me on the journey

@just4mewife Thanks! It’s a journey to build up a healthy pond ecosystem. I completely understand your concerns about invasive species-choosing the right plants can be tricky. If I didn’t have a source on my property, I’d look for a reputable native plant nursery that specializes in local species. Sometimes, local conservation groups or extension services can help with identification and even provide plants. If you’re unsure, starting small and observing how the plants adapt can be a good approach. There are also some great phone apps that can help with plant identification and provide basic information about the plants you’re considering. You’re already on the right track by being cautious and doing your research!

@ilovetrentinoslowlifeitaly Thank you for the kind words! There's something so calming about the sound of rain, isn’t there? I'm glad you enjoyed the video-it's always nice to share those peaceful moments with others.

Thanks for the kind words! It's amazing how plants can have such different experiences depending on their surroundings. It sounds like you’ve got a great setup with your no-till garden and plenty of space! I hope your squash continues to thrive and that you get a great harvest. Glad you enjoyed the pond project update-we're excited to see it come together too!

Lucas Red N' Tacky Grease is considered a high-quality multi-purpose grease that is widely used in various applications. It is known for its excellent properties and performance characteristics, making it a popular choice for many users. Here are some reasons why it is regarded as a very good grease: Key Features of Lucas Red N' Tacky Grease High-Temperature Performance: Temperature Range: Lucas Red N' Tacky Grease is designed to perform well in both high and low-temperature environments. It has a high drop point (the temperature at which grease will start to drip) of approximately 540°F (282°C), making it suitable for applications that involve high heat. Water Resistance: This grease offers excellent water resistance, which makes it ideal for applications where exposure to moisture or water is a concern. It helps prevent corrosion and rust, extending the life of the components. Tackiness: As the name suggests, Red N' Tacky Grease has a high level of tackiness, which means it adheres well to surfaces. This characteristic ensures that the grease stays in place and provides consistent lubrication, even under heavy loads and high-speed applications. Anti-Wear and Extreme Pressure Protection: It contains additives that provide superior protection against wear and tear, as well as extreme pressure. This makes it suitable for use in heavy-duty applications, such as bearings, gears, and joints. Oxidation Stability: The grease has good oxidation stability, meaning it maintains its performance over time without breaking down or hardening. This ensures long-lasting lubrication and protection. Versatility: Lucas Red N' Tacky Grease is a multi-purpose grease that can be used in a variety of applications, including automotive, industrial, agricultural, and marine. It is suitable for use in wheel bearings, chassis components, U-joints, and other moving parts.

@@GrowingABetterTomorrow I've seen the demos but I'm not completely convinced that's it's for everything yet. Having a 540f drop-point is way out of range for a grease-point that only gets hot b/c it is sitting out in the sun which can heat it up to ~126f. On some of the comparison-testing they are not checking temperatures of the metal surfaces they're grinding so IMO it gave the tacky-grease a misunderstood-advantage. Mainly moly-grease that uses graphite to work in dry conditions, I'm not sure the tacky is performing the same.

Hi @Michael We did replant several of the Golden Delicious winter squash seeds, and they’ve been growing well! Unfortunately, our local deer and raccoons have taken a liking to them, but we’re managing. Thank you so much for the seeds; we really appreciate it! It sounds like you have an amazing crop again this year-that’s incredible that you were able to give away so many last year. We always enjoy hearing from you, and it’s great to know you’ve been watching our videos despite the internet challenges. Thanks for your support, and take care!

Yes, seeds need to "breathe," or respire, during their dormant phase and especially during germination. Respiration in seeds is a metabolic process that involves the consumption of oxygen and the release of carbon dioxide, which is essential for energy production and growth.

Okay, but during long term storage they don't need to breathe, hence the shrink wrap? Sorry for all the questions!

Hi @DanielWallace-u6l, Thanks so much for your kind words! It's comforting to know I'm not alone in feeling that way as the years go by. I'm glad to hear you enjoy the music-it's a big part of what keeps me going and connected. I really appreciate your support and encouragement. Take care, and let's keep enjoying the journey together! Warm regards, Kevin